Get up to date news & articles directly in your inbox from LSX TV!
Michelle is a freelance New Products writer for powerTV. She is responsible for ensuring timely delivery of these releases.
Billy Boat Performance Exhaust used CNC mandrel-bent T304 stainless-steel tubing to create its new exhaust system for the 2010 Camaro SS/V8 and V6 for a precise fit.
Read More »
A safety blow-down kit for nitrous bottles is a must to vent dangerous overpressure out of the vehicle in the case of accidental overfilled or overheated bottles. ZEX made a kit that does just that job, but with good looks with polished fittings and nylon braided vent line. Official Release: Racetracks require your nitrous bottle [...]
Read More »
Fine-tune clutch pedal heights on aftermarket or OEM systems with the Ram Clutch Pedal Adjuster. It can help erase problems with over-travel of the release bearing, which can control it and cause high RPM engagement problems.
Read More »
The ZR1 Exhaust System from CORSA features their patented Reflective Sound Cancellation that provides different tones based on throttle input, and they claim that it bumps up the already ground pounding horsepower up an additional 12-14 RWHP.
Read More »
SPAL USA has four Curved Blade Fans that are lightweight and quiet for vehicles with tight-space requirements. These Curved Blade Fans feature 12V long-life motors, IP68-certified as waterproof and dustproof.
Read More »
Spohn Performance has replacement rubber boots for Spohn or Moog lower ball joints at a very affordable rate for when you’re doing the maintenance on your vehicle.
Read More »
Billy Boat’s new PRT C6 exhaust system has been completely redesigned and re-engineered for the C6. It is mellow at cruising speeds, but has a sporty note at speed.
Read More »
TCI has a new RollStop for the 2010 Camaro that fits both V6 and V8 vehicles that makes doing a monster burnout easier than ever.
Read More »
The new Comp Stick from Hurst fits automatic-equipped 2010 Camaros and is CNC’ed out of billet 6061 T6 aluminum and anodized black. It can be installed without mods to the stock console in either left- or right-hand vehicles.
Read More »
Wideband technology gives the Digital MTX air/fuel ratio gauge speed and accuracy. It’s compatible with all the popular fuel types and can be quickly and easily calibrated to compensate for sensor wear, changes in atmosphere or other variables.
Read More »
All Dynotech driveshafts are hand-assembled, computer-welded and high-speed balanced for your custom application. Dynotech says it can replace most OEM driveshafts at a lower cost than many local car dealers, and ship it in three days or less.
Read More »
With the ZEX Adjustable Nitrous Bottle Heater, racers can tune bottle pressure to the optimum 900-1000 psi for consistent nitrous pressure under racing conditions.
Read More »
This free App from JEGS lets drag racers practice reaction times and Christmas tree starts. It is also a fun app for non-racers too.
Read More »
Spohn’s Pro-Drag Rear Anti-Roll Sway Bar fits 2010-11 Camaros and reduces body roll and wheel hop. It’s made from solid 4140 heat-treated spring-grade chrome-moly steel and bolts in, without any mods needed, according to Spohn.
Read More »
Max Shift Cooler Flush from TCI Automotive is made with a patented high-pressure cleaning agent that expands when it comes in contact with air so it can backflush contaminants out, instead of relying on gravity.
Read More »
The new Bi-Modal Exhaust System for the C5 Corvette from Billy Boat has two modes of operating: one loud and the other quiet. This allows the driver to control how loud the exhaust is at the push of a button.
Read More »
K&N Engineering has two new high-performance air filters for 2006-2011 Z06 Corvettes and another specifically for 2009-2011 ZR-1 models. Both backed by K&N’s famous 1,000,000-mile limited lifetime warranty.
Read More »
The new RHS LS Race Block Belt Drive from Jesel like all their belt drive kits have Teflon-coated high-vacuum seals, externally adjustable cam timing, hard coated pulleys and Grade 8 mounting hardware.
Read More »
Lingenfelter’s Adjustable RPM Limiter is an adjustable, individual-cylinder rpm limiter that provides fast-acting, spark-based engine rpm-limit control so racers can fine-tune launches. It also features a Timing Retard function that can retard timing by up to 15 degrees.
Read More »
XS Power’s latest offerings include a new 16V lithium battery (L925-16A), and a 12V lithium battery (L680). They pack a big electrical punch with only a small amount of weight. Weighing in at 5-6 lbs, these batteries can be used in a number of different types of street or race cars depending on application.
Read More »
Edelbrock joined forces with Torco Advanced Lubricants and came up with a variety of Performance Engine Lubricants. These lubricants exceed API standards and, to make choosing the right lubrication an easy process, they come in color-coded bottles.
Read More »
The new COMP-One Water/Methanol-Injection System Plus Performance Tuner from Snow Performance is available for a variety of domestic Ford, GM and Dodge applications. It is formulated to help get the most power from supercharged or turbocharged gasoline engines, without custom tuning or high-octane fuel.
Read More »
Billy Boat’s new Long-Tube Header for 2010 Chevy Camaro couples to its cat-back system with a set of high-flow cat pipes. Increases in both horsepower and torque will be seen with this package, according to the maker.
Read More »
The Sportsman Series rocker kit for the GM LS3/L76/L92 cylinder heads from Jesel Valvetrain Innovation features a precision-machined steel rocker stand that attaches to the head without any type of cylinder-head modifications. The rockers are available in either a 1.70, 1.75 or 1.80 ratios.
Read More »
The new B&M Sport Shifter for 2008 and newer Corvettes has a high-precision spherical pivot bearing for firmer shift feel and control. No modification to factory trim is required and it comes with a limited lifetime warranty.
Read More »
This torque converter from TCI was made with the street enthusiast in mind. It is made with TCI’s proprietary Heat Dissipating Technology and TCI’s Triple Testing process of run-out testing, leak testing and computer balancing.
Read More »
After nine designs with 24 variables and 180 dyno pulls on six different vehicles, AEM Induction Systems achieved a power gain of 16.39 horsepower on the 2010 Camaro V6.
Read More »
The all-new starter from Proform Parts fits LS1, LS2, LS6, and LS7 engines and is competition approved. It increases cranking power and high-compression hot-start issues common in racing conditions.
Read More »
Improve the appearance and stopping performance of a restored Tri-Five with Wilwood Engineering’s Disc Brake Kit. The kit includes special caliper brackets, BP-10 brake pads and all the hardware needed for installation.
Read More »
Copyright ©2011 PowerTV Media, LLC. All rights reserved. Policy and Terms
