We believe in the magic of the automobile
IMG_3082GR

So how does a guy go from specializing in classic Oldsmobile musclecars to racing a 5th Gen Camaro? It’s not as big a jump as it might seem, once you know the backstory…

Read More »


ls30

Are you running the correct viscosity oil in your high-performance engine? Lake Speed Jr. of Driven Racing Oils covers the factors to consider before you pour cheap, “fuel economy” oil into your boosted powerplant.

Read More »


a21_zps1cacacd6

“80 percent of the people that don’t know what it is asks me if it is a ‘James Bond car’,” says Robert Jackson, whose company, Swedish Ops, built this Volvo Amazon into what it is now: The Volvo X.

Read More »


MG4_0413

Round 1 of Formula Drift for 2014 has come and gone, and here in SoCal we wait until the series comes back to The House Of Drift at Irwindale Speedway, but for now, check out the recap of this past weekend!

Read More »


MG4_8973

Project BlownZ 2.0 made its season debut just over a week ago at the NMCA WEST’s opener showing exceptional promise with a 7.52 in the first round. We give you the details on the first debut race weekend.

Read More »


MG4_0146

Regardless of whether you’ve ever used a parachute before, or if your program is getting quicker and you need something different, you need to check this out – it’s all you need to know about popping the ‘chute.

Read More »


IMG_7187

Produced with racers in mind, Airaid’s Track Day and Race Day filters are designed to give high-performance engines the maximum amount of airflow while still protecting them from particles. Check them out inside!

Read More »


MG3_6730GR

Follow along as we upgrade Project Y2k with a new SSI intake manifold, 80mm throttle body, and high flow billet fuel rails from BBK… There’s a surprise at the end, too!

Read More »


09

Follow along and see how Probe Industries manufactures pistons in its Torrance, California, facility. The company offers two series of pistons, and both are fully machined to meet most engine builders’ needs.

Read More »


strike

“The strike vote doesn’t necessarily mean we will strike, but it does give us the authorization…” – UAW Local 2164 President Eldon Renaud

Read More »


Hurst013

There’s a lot more to making a shifter than you think, and Hurst explains why cutting the top of your shifter isn’t the best way to go about making a short-throw shifter. We toured Hurst recently, see more inside.

Read More »


(20) trans case passenger side

We’ve teamed with the gang at Hughes to not only deliver us a top-flight piece for BlownZ this season, but also to take us (and you, the reader) on a guided walk-though of the construction of their Turbo 400′s.

Read More »


1-The Finished Product

Part of a winter rebuild for Blown Z included a new 400ci LSX engine built by Late Model Engines to support a bigger ProCharger supercharger. Check out all the details that make up this very stout engine.

Read More »


013 (Custom)

The team at Pace Performance has assembled a massive lineup of LS crate engines and engine/transmission packages from mild to wild to satisfy the most critical buyer. Check ‘em out!

Read More »


Screen Shot 2014-04-01 at 8.55.27 AM

This LS7-powered British supercar is as exclusive as it is fast, and in these videos we get a close look at the car both being built and on the dyno…

Read More »


MSDinstalled

Want to take advantage of EFI but are afraid of complicated tables of equations and expensive equipment? Now you can with self tuning EFI systems. If you are wondering which one is right for you, read more here.

Read More »


MG3_9857

Project BlownZ takes advantage of the latest advances in intercooling technology with a 5-inch tubing upgrade, along with a brand-new air-to-water intercooler with a straight-through design.

Read More »


082

Selecting the right cold air intake system for your LS-powered vehicle takes some homework, but it’s worth the time involved. Here’s how to get started…

Read More »


Subscribe

Get the most up to date news & articles directly in your inbox from LSX TV!

We will never share your email address


V300SD

If you’ve never had a data acquisition system before, you and your racing program are missing out. We get on the inside with Racepak’s Roger Conley to find out what’s important in choosing a system for your needs.

Read More »


MG3_9927

When Mike Franz picked up this 1LE Camaro, we had to check it out. See what modifications he did to take this car from a factory machine, to a street champion.

Read More »